Setup

As used at the 2012 SCCA San Diego Solo National Tour:

Koni Race (yellow) shocks front and rear; full stiff front, full soft rear
Custom PES spherical bearing top shock mounts
Front springs - 2.25" diameter x 6" length 750# Hyperco, Koni threaded perches
Rear springs - 2.5" diameter x 6" length 375# Eibach, Ground Control threaded perches
AWR adjustable rear upper control arms
Racing Beat 1.125" diameter, 3/16" wall, hollow front sway bar - no rear sway bar
15x8 +40 949 6UL wheels, 225/45-15 Hankook RS3; 25 psi rear, 27 psi front
Front brake pads OEM
Rear brake pads Hawk HPS
Mazda Competition sway bar end links
Mazda Competition motor mounts
Momo Start bottom-mount seat installed on OEM sliders
MiataRoadster short shifter kit, eBay delrin shift knob
Odyssey PC545 battery
K&N cold air intake
OBX 4-2-1 header
Goodwin Racing midpipe
Enthuza NB Speeder axle-back exhaust
DPTune ECU re-flash with 7500 rpm rev limiter
2168 lbs with 1/4 tank fuel, SCCA scales
Zero front toe, 3/16 total rear toe in, approx -3* camber F&R